Search Used Inventory    Search Products & Site

Double tap to zoom

 

Features

  • Heavy-duty frame provides strength and durability
  • Michelin® X® Tweel® Turf airless radial tire technology for ZTrak™ Mowers eliminates downtime and reduces cost of operation
  • Powerful 29-hp (21.6-kW) commercial-grade, electronically-fuel-injected engine delivers class-leading performance and efficiency
  • Durable hydrostatic drive train that delivers better cooling and provides easy access
  • Three seat choices with ComfortGlide™ fore/aft suspension offer exceptional operator comfort
  • Mower is easy to service with many accessible components
  • Three-year, bumper-to-bumper warranty
  • Durable 7-Iron™ PRO decks pressed from a single piece of steel
  • Available Mulch On Demand™ deck
  • Spindle assembly provides greater performance and reliability

Specifications

Model John Deere Z955M EFI Ztrak Zero-Turn Mower
KEY SPECS 
Engine Manufacturer/model ECV860J EFI
Engine Power Gross at 3,600 rpm: 29 hp (21.6 kW)
Fuel tank capacity 11.5 U.S. gal. (43.5 L)
Mower deck Size 60, 72 in. (152, 183 cm)
Blade tip speed Approximately 18,000 fpm (5,486 m/min)
Transmission Hydrostatic
Speed range 0-10 mph (0-16.1 km/h)
Drive wheels 24x12-12
Caster wheels 13x6.5-6
Warranty 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation
ENGINE 
Manufacturer/Model ECV860J EFI
Power Gross 3,600 rpm: 29 hp (21.6 kW)
Displacement 50.3 cu in. (824 cc)
Cylinders Two
Crankcase capacity With filter, 2.7 U.S. qt (2.6 L)
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air cleaner Pre-cleaner Yes Heavy-duty canister type with safety element
FUEL SYSTEM 
Fuel type Gasoline
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.0-1.8 U.S. gal./hr (3.8-6.8 L/hr)
Fuel tank capacity 11.5 U.S. gal. (43.5 L)
Fuel tank switch/shut-off valve Yes
ELECTRICAL SYSTEM 
Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (hand)
DRIVETRAIN 
Transmission Hydrostatic
Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Travel speed Speed range 0-10 mph (0-16.1 km/h); Forward 0-10 mph (0-16.1 km/h); Reverse 0-4.5 mph (0-7.2 km/h)
Speed and direction control Twin levers
Hydraulic capacity 5.9 U.S. qt (5.6 L)
Filter Internal, replaceable
BUYER'S NOTE 
Warranty 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation
TIRES 
Drive wheels 24x12-12
Load rating 4 PR
BRAKES 
Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake
PTO 
Type Electro-magnetic, 225 lb-ft (305 Nm)
Drive V-belt
MOWER DECKS 
Size 60, 72 in. (152, 183 cm)
Deck construction 7 Iron PRO, one-piece stamped steel with reinforcements
Deck thickness 7 gauge 0.18 in. (4.6 mm)
Discharge Side, MOD
Height-of-cut range Increments 0.25 in. (0.64 cm); 1-5.5 in. (2.54-14 cm)
Cutting width 60, 72 in. (152, 183 cm)
BLADES 
Length Varies by deck size
Thickness 0.25 in. (0.64 cm)
Blade tip speed Approximately 18,000 fpm (5,486 m/min)
Number Three
WHEELS 
Caster wheel type Flat free
Caster wheels 13x6.5-6
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
DIMENSIONS 
Length 84 in. (213.4 cm)
Width With chute down, 74, 86 in. (188, 218.4 cm)
Height With ROPS up, 73 in. (185.4 cm); With ROPS down, 47 in. (119.4 cm)
Weight 1,275 to 1,365 lb (578 to 619 kg)
ADDITIONAL INFORMATION 
Date collected 23-May-2018