Search Used Inventory    Search Products & Site

Double tap to zoom

 

Features

  • Heavy-duty frame provides strength and durability
  • Michelin® X® Tweel® Turf airless radial tire technology for ZTrak™ Mowers eliminates downtime and reduces cost of operation
  • Field-installed propane conversion kits for Commercial Walk-Behind Mowers, QuikTrak™ Mowers, and Commercial ZTrak™ Mowers
  • Durable hydrostatic drive train that delivers better cooling and provides easy access
  • Three seat choices with ComfortGlide™ fore/aft suspension offer exceptional operator comfort
  • Mower is easy to service with many accessible components
  • Three-year, bumper-to-bumper warranty
  • Durable 7-Iron™ PRO decks pressed from a single piece of steel
  • Available Mulch On Demand™ deck
  • Spindle assembly provides greater performance and reliability

Specifications

Model John Deere Z930M Ztrak Zero-Turn Mower
KEY SPECS 
Engine Manufacturer/model FX801V
Engine Power Gross at 3,600 rpm (19 kW)
Fuel tank capacity 11.5 U.S. gal. (43.5 L)
Mower deck Size 54, 60 in. (137, 152 cm)
Blade tip speed Approximately 18,000 fpm (5,486 m/min)
Transmission Hydrostatic
Speed range 0-10 mph (0-16.1 km/h)
Drive wheels 24x12-12
Caster wheels 13x6.5-6
Warranty 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation
ENGINE 
Manufacturer/Model FX801V
Power Gross at 3,600 rpm, 25.5 hp (19 kW)
Displacement 52 cu in. (852 cc)
Cylinders Two
Crankcase capacity With filter, 2 U.S. qt (1.9 L)
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air cleaner Pre-cleaner Yes Heavy-duty canister type with safety element
FUEL SYSTEM 
Fuel type Gasoline
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr)
Fuel tank capacity 11.5 U.S. gal. (43.5 L)
Fuel tank switch/shut-off valve Yes
ELECTRICAL SYSTEM 
Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (hand)
DRIVETRAIN 
Transmission Hydrostatic
Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Travel speed Speed range 0-10 mph (0-16.1 km/h); Forward 0-10 mph (0-16.1 km/h); Reverse 0-4.5 mph (0-7.2 km/h)
Speed and direction control Twin levers
Hydraulic capacity 5.9 U.S. qt (5.6 L)
Filter Internal, replaceable
BUYER'S NOTE 
Warranty 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation
TIRES 
Drive wheels 24x12-12
Load rating 4 PR
BRAKES 
Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake
PTO 
Type Electro-magnetic, 225 lb-ft (305 Nm)
Drive V-belt
MOWER DECKS 
Size 54, 60 in. (137, 152 cm)
Deck construction 7-Iron PRO, one-piece stamped steel with reinforcements
Deck thickness 7 gauge 0.18 in. (4.6 mm)
Discharge Side, MOD
Height-of-cut range Increments 0.25 in. (0.64 cm); 1-5.5 in. (2.54-14 cm)
Cutting width 54, 60 in. (137, 152 cm)
BLADES 
Length Varies by deck size
Thickness 0.25 in. (0.64 cm)
Blade tip speed Approximately 18,000 fpm (5,486 m/min)
Number Three
WHEELS 
Caster wheel type Flat free
Caster wheels 13x6.5-6
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
DIMENSIONS 
Length 84 in. (213 cm)
Width With chute down, 68, 74 in. (173, 188 cm)
Height With ROPS up, 73 in. (185 cm); With ROPS down, 47 in. (119 cm)
Weight 1,275 to 1,365 lb (578 to 619 kg)
ADDITIONAL INFORMATION 
Date collected 23-May-2018

Accessories and Attachments

Lighting

+ LED Beacon Light Kit - BUC10603

+ LED front work light kit (2) - BUC10506

+ LED front work light kit (2) - BUC10955

Miscellaneous

+ Beacon Light Kit - LP40112

+ Foot peg kit - BUC10864

+ Hitch Kit - TCB11531

+ Jack Kit - BTC10906

+ Jack Kit - BUC10584

+ Sun Canopy - LPA11548

+ Trash Receptacle Kit - TCB11248

Mulch Kits

+ Mulch Kit (1371.6-mm (54-in.) 7-Iron, 7-Iron II, 7-Iron PRO and HC) - TCB11469

+ Mulch Kit (1524-mm (60-in.) 7-Iron, 7-Iron II and 7-Iron PRO) - TCB10953

Rear Hitch

+ Hitch Kit - BUC10300

Seat

+ Arm rest kit - Padded (Set of 2) - BUC10649

+ Isolated Suspension Seat Kit - BTC10907

+ Suspension Seat Kit - BUC10467

+ Suspension Seat Kit (High Back 24") - BUC10894

Spark Arrester

+ Spark Arrester Screen - AM115838

Striping Kits

+ Rubber Flap Striping Kit for 1371.6-mm and 1524-mm (54-in. and 60-in.) Decks - BTC10286

AKRS Equipment Solutions