John Deere Z915E

Double tap to zoom

Features
Specifications

Features

Heavy-duty frame provides strength and durability
Michelin® X® Tweel® Turf airless radial tire technology for ZTrak™ Mowers eliminates downtime and reduces cost of operation
Powerful 25.0-hp (18.6-kW) commercial-grade engine delivers class-leading performance and efficiency
Durable hydrostatic drive train that delivers better cooling and provides easy access
Two seat choices with ComfortGlide™ fore/aft suspension offer exceptional operator comfort
Mower is easy to service with many accessible components
Three-year, bumper-to-bumper warranty
Durable 7-Iron™ II decks pressed from a single piece of steel
Spindle assembly provides greater performance and reliability

Specifications

Model	John Deere Z915E Ztrak Zero-Turn Mower
KEY SPECS
Engine Manufacturer/model	CV742
Engine Power	Gross at 3,600 rpm: 25 hp (18.6 kW)
Fuel tank capacity	11.5 U.S. gal. (43.5 L)
Mower deck Size	48, 54, 60 in. (122, 137, 152 cm)
Blade tip speed	Approximately 18,000 fpm (5,486 m/min)
Transmission	Hydrostatic
Speed range	0-10 mph (0-16.1 km/h)
Drive wheels	24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)
Caster wheels	13x5-6
Warranty	36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation
ENGINE
Manufacturer/Model	CV742
Power	At 3,600 rpm, 25 hp (18.6 kW)
Displacement	45.6 cu in. (747 cc)
Cylinders	Two
Crankcase capacity	With filter, 2 U.S. qt (1.9 L)
Oil filter	Full flow, replaceable
Lubrication	Full pressure
Cooling	Air
Air cleaner	Pre-cleaner Yes Heavy-duty canister type with safety element
FUEL SYSTEM
Fuel type	Gasoline
Fuel consumption	Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr)
Fuel tank capacity	11.5 U.S. gal. (43.5 L)
Fuel tank switch/shut-off valve	Yes
ELECTRICAL SYSTEM
Charge system	15 amp
Battery voltage	12 V
Cold cranking amp	300 amp
Hour meter	Standard, digital
Operator presence starting system	Brake-N-Go (hand)
DRIVETRAIN
Transmission	Hydrostatic
Hydraulic pumps
Wheel motors	Tuff Torq heavy-duty integrated piston wheel motor
Travel speed	Speed range 0-10 mph (0-16.1 km/h); Forward 0-10 mph (0-16.1 km/h); Reverse 0-4.5 mph (0-7.2 km/h)
Speed and direction control	Twin levers
Hydraulic capacity	5.9 U.S. qt (5.6 L)
Hydraulic oil cooler
Filter	Internal, replaceable
BUYER'S NOTE
Warranty	36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation
TIRES
Drive wheels	24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)
Rear tires
Load rating	4 PR
BRAKES
Dynamic braking	Twin levers
Park brake	Internal wet disk integrated in the transmission
Park brake actuation	Hand brake
PTO
Type	Electro-magnetic, 200 lb-ft (271 Nm)
Drive	V-belt
MOWER DECKS
Size	48, 54, 60 in. (122, 137, 152 cm)
Deck construction	One-piece stamped steel with reinforcements
Deck thickness	7 gauge 0.18 in. (4.6 mm)
Discharge	Side
Height-of-cut range	Increments 0.25 in. (0.64 cm); 1-5.5 in. (2.54-14 cm)
Cutting width	48, 54, 60 in. (122, 137, 152 cm)
BLADES
Length	Varies by deck size
Thickness	0.25 in. (0.64 cm)
Blade tip speed	Approximately 18,000 fpm (5,486 m/min)
Number	Three
WHEELS
Caster wheel type	Pneumatic Front
Caster wheels	13x5-6
Front anti-scalp rollers	RH, center, LH
Rear anti-scalp rollers	Optional
DIMENSIONS
Length	84 in. (213 cm)
Width	With chute down, 62, 68, 74 in. (157, 173, 188 cm)
Height	With ROPS up, 73 in. (185 cm); With ROPS down, 47 in. (119 cm)
Weight	1,100 to 1,178 lb (499 to 534 kg)
ADDITIONAL INFORMATION
Date collected	23-May-2018

Amount Financed ($)
Interest Rate (%)
Loan Term in Months
Monthly Payment	Calculated

Request Brochure

Send To A Friend

Loan Calculator

Features

Specifications

John Deere Z915E

Commercial Z900 Series Z915E

Get A Quote

Request Brochure

Send To A Friend

Loan Calculator

Features

Specifications