Delivers quick acceleration and provides a top speed of 28 mph (45 km/h)

The Gator™ XUV560E Crossover Series Utility Vehicles are powered by a 34.8 cu in. (570-cm3), V-twin gasoline engine. The carburetor is tuned for rapid throttle response, reliable cold-weather starting, smooth mid-range power delivery and quiet idling.

 

The engine offers the following performance and reliability features:

• 11.9 kW (16 hp*) at 3600 rpm
• Tuned to deliver 0 to 24.1 km/h (0 to 15 mph) acceleration in 3.5 seconds
• 45 km/h (28 mph) top speed
• Dynamically tuned carburetor for rapid throttle response upon demand while allowing the engine to burn clean under light loads.
• V-twin, 90-degree overhead valve design maximizes power and torque and provides longer valve life
• Designed for cold-weather starting (tested to -20°F [-28.9°C])
• Full-pressure lubrication system
• Spin-on oil filter with drain bracket and oil drain valve enable easy servicing
• High air-flow air filter
• Laminated and contoured engine blower housing cuts noise levels while reducing oil temperatures 25-30 degrees
• T6 heat-treated aluminum alloy connecting rods and piston ring package
• 200 -W(16 maximum amp) stator charging system for accessory capability
• Dual-header pipe to muffler maximizes airflow and provides a unique V-twin sound
• Spark-arresting muffler is United States Forest Service (USFS) approved
• Low fuel consumption and large 4.9-U.S. gal. (18.9-L) fuel tank
• Environmental Protection Agency (EPA) and California Air Resources Board (CARB) compliant

 

* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.

Designed for all-day comfort with many vehicle conveniences

• Operator-centric design provides class-leading ergonomics and comfortable seats
  • Easy entry/exit and pass through for operator and passenger
  • Optimal seating position provides more legroom
  • Automotive-like ergonomics
  • Excellent comfort while driving
• Best-in-class sealed storage volume of 12.7 gal. (48 L) with a large in-dash glove box and under hood storage. An additional 9 gal. (34 L) of under-seat storage is available on the S4 models.
• Hinged hood rotates open without tools for access to storage
• Side-by-side seating provides ample room for one operator and one passenger
  • Seats tilt forward for ease of service and to keep dry during outdoor storage
• Two cup holders are located within reach of the operator's station
• Hour-meter comes standard to assist in maintaining regular service intervals
• Standard 12-V direct current (VDC) outlet is conveniently located on the instrument panel
• Seven predrilled dash switch locations with snap out caps for various electrical accessories
• Fuel gauge that can be viewed from the operator's seat
• Occupant protective structure (OPS) with three-point seat belts and passenger side grab handles located on front post
• Start in gear or neutral position for quick starting. The service brake must be engaged to start.

 

Large, extra-durable, one-piece cargo box ensures hard-driving performance and longevity

The cargo box consists of a high-density polyethylene copolymer composite material that eliminates rust, dents, and reduces noise. This large, one-piece design has rounded inside corners to ensure material removal when tilted. The composite box is highly ribbed and supported with a welded, steel-ladder structure to ensure hard-driving performance and longevity. The three highly-styled exterior pieces are made of TPO for extra durability.

Cargo box tailgate

The tailgate can be opened or removed for easier cleanout and to carry longer items. It features truck-like performance and can be operated with one hand.

 

The tailgate’s pivot point is made of hardened steel for durability and designed for tool-free removal. The standard lanyards can also be disconnected without tools to remove the tailgate for convenient loading and unloading tasks.

Cargo box tilt and removal

The cargo box ease of use is critical to performing tasks quickly and efficiently. Starting with the truck-style tailgate, the removal of content in this cargo box could not be easier. The manual release also functions as the lift lever, done in a smooth, one-step motion. It can even be tilted from both sides of the vehicle. To reduce the overall effort of lift, the pivot point of the cargo box is closer to the center. The combination of easy-to-use attributes makes this cargo box best-in-class.

 

For servicing the vehicle’s systems, the cargo box is easily removable. With the removal of two bolts, the cargo box can easily be detached from the vehicle frame.

Integrated tie-down points

The cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:

• Flip-up D-shaped rings in all four corners inside the cargo box bed
• Multiple points along the edge of the cargo box side walls
• Tie-down bars on either side of the cargo box with optional cargo box rail kit. This kit also provides a mounting system using accessories that possess the 25.4-mm (1-in.) quick clamp.

Optional accessories

Optional accessories for the cargo box include (see price pages or JDConfigurator for complete list):

• Cargo box rail system
• Cargo box mat
• Cargo box power lift
• Cargo box wall extensions
• Spare tire rack
• Bucket holder

Specifications

Length	82 cm (32.3 in.)
Width	120.9 cm (47.6 in.)
Depth	29.7 cm (11.7 in.)
Volume	0.25 m3 (8.9 cu ft)
Weight capacity	227 kg (500 lb)
Dump angle Bed height (from ground)	45 degrees 76.3 cm (30 in.)

 

CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.

Four-wheel independent suspension provides unparalleled ride over challenging terrain and excellent handling through corners

To complement the comfortable operation station, the XUV560 and XUV590 Series are equipped with four-wheel independent suspension. This unique suspension set-up provides an unparalleled ride over challenging terrain and excellent handling through corners.

 

The engineering team, in collaboration with engineering firms that consult with Formula 1®, NASCAR®, and INDYCAR® teams, built a capable suspension system for class-leading operator comfort no matter what the terrain.

Dual A-arm front suspension features include:

• Dual, wide arch A-arm design provides maximum front-wheel control, precise steering, and maximum ground clearance out to the wheel
• 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
• Adjustable coil-over shocks absorb the most demanding terrain
• Solid anti-roll bar with fully rubber isolated connecting links and pivots is tuned to provide the most agile and predictable handling
• Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
• Increasing vehicle width during compression for additional stability.
• High-strength ASTM 80-55-06 ductile cast-iron knuckle and upper A-arm to support the high stresses of the shocks, constant-velocity (CV) shaft, and wheels
• Automotive-style, fully boxed and welded, high-strength steel, lower A-arms to minimize unsprung mass and maximize strength
• Maintenance-free, rubber torsional A-arm pivots for long life and quiet operation
• CV shaft protection from sticks that may puncture the rubber boot
• Anti-dive front suspension geometry provides a solid platform for confident braking
• Optimized steering geometry using ADAMS CAR simulation to minimize steering effort and maximize terrain feedback

Independent rear suspension features include:

• 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
• Unique, independent rear-suspension design ensures a great ride and protection for the CV shafts
• Adjustable coil-over shocks absorb the most demanding terrain
• Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
• Increasing vehicle width during compression for additional stability.
• High-strength ASTM 80-55-06 ductile cast-iron knuckle, lower A-arm, and upper link to support the high stresses of the shocks, CV shaft, and wheels with the toughness to survive impacts from boulders
• Maintenance-free rubber torsional A-arm pivots for long life and quiet operation

Optional Fox™ Shocks are available to factory install

Exclusive aluminum-body, high-pressure monotube FOX racing shocks

• Fully adjustable spring preload for different driving styles
• High-pressure nitrogen gas is separated from the damping oil by an internal floating piston (IFP). The separation prevents aeration (frothing) and viscosity degradation of the oil which improves damping consistency and performance fade.
• Pressure and heat generation in the monotube is less than a traditional twin-tube shock, allowing for better vehicle control in aggressive conditions.
• The single aluminum shell of the monotube design allows for more efficient heat rejection and lower overall unsprung mass.
• Mounting the shaft end of the shock to the suspension arm lowers the unsprung mass of the suspension system, leading to improved suspension response.

NASCAR is a trademark of NASCAR. INDYCAR is a trademark of Brickyard Trademarks Incorporated. Formula 1 is a trademark of Formula One Licensing BV, a Formula One Group Company.

Sleek styling exemplifies capable off-road, yet hard-working performance

A modern front fascia, wide front bumper, sweeping hood lines, and high fender lines complete the styling package:

• Sleek styling exemplifies a capable off-road, yet hard-working vehicle. The Gator™ XUV Series suits the emotional appeal of an operator purchasing a vehicle that is fun and functional.
  • Hard-edged lines
  • Hood bulge
  • Sweeping headlights with mounting locations for a turn signal light kit
  • High front and rear fenders states long wheel travel
  • Well-matched cargo box with truck-style tailgate
• Steel front bumper supports the styled front composite parts, while the heavy steel skid plate provides protection from rocks and stumps
• Styled parts are injection-molded TPO, a durable, engineered plastic designed to sustain impacts; the plastic is paintable
• Accepts the highly integrated optional 50.8-mm (2-in.) front receiver hitch with recovery loops and WARN® 1587.6-kg (3500-lb) winch
• 75-plus attachments, such as roofs, windshields, lights, protection components, and poly cab highly complement the overall look of a capable crossover vehicle.

 

WARN is a trademark of Warn Industries, Inc.

Key Specs

Ag Management Solutions

+ Ag Management Solutions (AMS) Integration Kit - BM25411

 

Backup Alarm

+ Backup Alarm - BM23369

 

Bumper

+ BM23309

+ Front Brushguard - BM23365

+ Front Fender Guards - BM23394

+ Full Underbody Skid Plate (XUV560) - BM24095

+ Rear Bumper - BM23362

 

Cargo Box

+ 19 L (5 gal) Pail Holder - BM23849

+ Box Mat - BM23371

+ Cargo Box Power Lift - BM25960

+ Cargo Box Rails - BM23526

+ Cargo Box Wall Extensions - BM23384

+ Cargo box side extensions cover - BUC10155

+ Sportsman Gear Bag - LP67755

+ Tire Rack - BM23385

 

Carts

+ Utility Cart, 21 Steel - LPUT21JD

 

Cover

+ Front Seat Cover - Black - LP66658

+ Front Seat Cover - Camo - LP66659

+ Front Seat Cover - Yellow - LP66449

+ Vehicle Cover - Black - LP37036

+ Vehicle Cover - Transportable (Black) - LP37040

 

Drawbar

+ 48mm (1 7/8-in.) hitch ball for ball-type hitch. Ball Mount sold separately. - PM05101

+ 51mm (2-in.) hitch ball for ball-type hitch. Order ball mount separately. - PM05201

 

Drawbar

+ 50.8-mm (2-in.) Front Receiver Hitch and Recovery Loops - BM23363

+ Drawbar/ ball mount for 51mm (2 in.) receiver hitch. Hitch Ball sold separately. - BM22290

 

Front Rack

+ Front Rack - BM23360

+ MOLLE Device Pouch - Black - LP66151

+ MOLLE Device Pouch - Camo - LP66150

+ MOLLE Fire Extinguisher Pouch - Black - LP66153

+ MOLLE Fire Extinguisher Pouch - Camo - LP66152

+ MOLLE Large Pouch - Black - LP66149

+ MOLLE Large Pouch - Camo - LP66148

+ MOLLE Small Pouch - Black - LP66147

+ MOLLE Small Pouch - Camo - LP66146

 

Harnesses

+ Beacon Light Harness Kit - BM26182

+ Brush Guard Light Harness Kit - BM25619

+ Front OPS/Roof Light Harness Kit - BM25620

+ Rear OPS/Roof Light Harness Kit - BM25731

 

Horn

+ Horn Kit - BM23370

 

Lighting

+ Beacon Light - BM25553

+ Brake and Tail Light Kit - BM25965

+ LED Driving Lights - BM25704

+ LED Work Lights - BUC10222

+ Occupant Protective Structure (OPS) Switch Bank - BM24089

+ Work Lights (Halogens) - BM25544

 

Mirrors

+ Occupant Protective Structure (OPS) Rear View Mirror - BM25148

+ Occupant Protective Structure (OPS) Side Mirrors - BM24737

+ Poly Cab Mirror - BM24796

 

Operator's Station

+ Door seal kit (2 pass) - BUC10253

+ Floor Mat - BM23368

+ Glove Box Lock - BM24200

+ ORS Net Kit - BM25958

+ Occupant Protective Structure (OPS) Rear Panel - BM25014

+ Occupant Protective Structure (OPS) Rear Screen - BM23396

+ Poly Door Kit, MDUV 2 Pass - BUC10542

+ Sport Steering Wheel - BM23933

 

Radio

+ Stereo and Speaker Kit - BM23379

 

Roof

+ Canvas Roof / Rear Panel - BM25999

+ OPS Soft Roof - Black - LP37046

+ Occupant Protective Structure (OPS) Poly Roof - Black - BUC10243

 

Seat

+ Seat-Belt Comfort Strap (2) - BM26583

 

Speed Control

+ High-Capacity Alternator - BM23438

+ High-Capacity Alternator - BUC10624

+ Speedometer Kit - BM26748

 

Sprayers

+ Tow-Behind High Performance Sprayer, 45 gal. (170 L), requires LP22884 or LP22885 boom - LP39963

+ Tow-Behind Sprayer, 45 gal. (170 L) - LP20485

 

Sprayers

+ 25 Gallon Bed Sprayer - LP39965

+ 45 Gallon Bed Sprayer - LP39964

+ 45 Gallon High Performance Bed Sprayer - LP39098

+ HP Standard Gator Boom - LP22911

+ High Performance Sprayer Precision Boom (12.5 ft) - LP22885

+ High performance boomless nozzles - LP22884

 

Spreaders

+ 17AT Cart - LPPCT17ATJD

+ 3 cu. ft. Fertilizer Spreader - LP49056

+ 3 cu. ft. Salt Spreader - LP49055

+ Spreader Hitch and Controls - LP53513

 

Storage

+ OPS Overhead Organizer - Black - LP37044

+ Turn Signals

+ Turn Signal Kit - BM26180

+ Turn Signal Light Harness Kit - BM26183

 

Winch

+ WARN ProVantage 3500 lb Winch - BM26741

+ Winch Accessories Kit - BM21392

+ Wireless Winch Remote - BM26662

+ Winch Mounting Kit

+ Winch Mounting Kit (for non winch ready vehicles) - BM26249

 

Windshield

+ Abrasion Resistant Half Windshield - BM25259

+ Canvas Rear Panel - BM26000

+ Full No-Scratch Flip-Open Windshield - BM23373

+ OPS Glass Windshield w/ Wiper - BM25344

+ OPS Glass Windshield w/ Wiper - BUC10159

+ Occupant Protective Structure (OPS) Windshield Washer Kit - BM25103

+ Rear Dust Panel - BM25967