Powerful diesel engine delivers superb starting, idling, and throttle response
The machine is powered by an 854-cc (52.1-cu in.), 3-cylinder, liquid-cooled, four-cycle diesel engine. It produces 5.1 kgm (36.9 lb-ft) of torque at 2400 rpm.
The advanced engine delivers superb starting, idling, and throttle response during operation. With minimal noise vibration and harshness (NVH), the XUV855 is the smoothest and quietest running diesel in its class.
The engine offers the following performance and reliability features:
- Indirect injection diesel with glow plugs ensures fast starts in cold temperatures
- 30.6 kW (22.8 hp*) at 2400 rpm
- Overhead valve design for greater efficiency and fuel economy
- Spin-on oil filter for easy servicing
- Quiet operation through the entire rpm range
- Molybdenum-coated pistons
- High-stiffness cylinder block and gearcase
- High-flow water pump and optimized water jackets maintain a steady operating temperature and eliminate hot spots
- Full-pressure lubrication system
- In-line mechanical fuel pump
- Five-point, rubber isolated for quiet operation and minimal vibration
- Dry replaceable dual-element air cleaner with remote intake and a restriction indicator
- See-through coolant recovery tank permits the operator to check the coolant level without removing the radiator cap
- Sealed radiator compartment keeps trash and debris on the outside of the grille
* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.
Dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics
To complement the most capable frame available in a high-performance utility vehicle, the XUV is equipped with four-wheel independent suspension.
A dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics.
The entire suspension system has been optimized to handle no cargo to maximum cargo without compromising ride quality or vehicle stability.
Dual A-arm front suspension features include:
- 203.2 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
- 17.5-mm (0.6875-in.) solid anti-roll bar with fully rubber isolated connecting links and pivots for minimal vehicle body roll and quiet operation
- Heavy-duty, nodular cast-iron knuckles to support the strut, constant-velocity (CV) shaft, and wheel
- Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
- CV shaft protection from sticks that may puncture the rubber boot
Dual A-arm independent rear suspension features include:
- Unequal length, dual A-arm construction for superior wheel control and travel
- 228.6 mm (9 in.) of total travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction, excellent ride quality, and vehicle control
- Coil-over shocks absorb the most demanding terrain
- A-arms made from square/rectangular tubing reduce weight while remaining rigid
- Heavy-duty, nodular cast-iron uprights support wheel loads with a double row of ball bearings
- CV driveshaft protection from sticks that may puncture the rubber boot
- Rear sway bar for lateral stability
Superior terrain capability
The Gator™ XUV Crossover Series Utility Vehicle has a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously-variable clutch system to the transaxle.
Key elements of the drive system include:
The variable-speed drive consists of two clutches and a drive belt:
- Drive clutch is attached to the engine.
- Driven clutch is attached to the transaxle.
- The engine braking system utilizes a tight belt for operation, requiring an idler sleeve on the primary clutch for neutral. The secondary clutch is a new build-on-shaft design that utilizes a cam to tune the acceleration and deceleration of the vehicle. The clutch will stay engaged, providing deceleration until approximately 5 km/h (3 mph).
- The continuously variable transmission (CVT) air intake draws in 50 percent more air versus previous designs to reduce heat and the amount of water ingestion into the CVT system. The system will reduce belt slippage and improve durability.
- A low- and high-speed forward gear offering:
- Low range is 0 km/h to 43 km/h (0 mph to 27 mph), XUV825E and XUV825M S4
- Low range is 0 km/h to 24 km/h (0 mph to 15 mph), XUV855E and XUV855M S4
- High range is 0 km/h to 71 km/h (0 mph to 44 mph), XUV825E and XUV825M S4
- High range is 0 km/h to 51 km/h (0 mph to 32 mph), XUV855E and XUV855M S4
- Ability to creep along slowly to maneuver in tight spaces
- Standard full-clutch enclosure with high speed fan provides longer belt and clutch life
- High-ratio clutches with three cam weights for maximum belt clamp load in high-torque conditions
- Powertrain reduction ratios:
- The complete reduction ratios range for high gear is 8.6:1 at top speed and 42:1 at initial clutch engagement. This varies between the vehicles listed above.
- The complete reduction ratios range for low gear is 17.9:1 at top speed and 86.8:1 at initial clutch engagement. This varies between the vehicles listed above.
NOTE: Delivery and torque to the ground depends on tire size, which is a function of nominal size and pressure.
How the variable-speed drive works:
- As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
- As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
- With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
- The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.
Transaxle, mechanical front-wheel drive (MFWD), and constant-velocity (CV) shafts
- On-demand true four-wheel drive (4WD) system with an auto-locking front differential and dash-mounted electronic rocker switch is best in class; when the rocker switch is in the on 4WD position, the front differential will automatically lock for extra traction when needed, but when the rocker switch is in the off two-wheel drive (2WD) position, the vehicle will remain in 2WD
- Provides exceptional traction in challenging conditions
- Maintains turf-friendly operation in 2WD mode
- Illuminated for visibility in low-light conditions
- Two-speed, fully-enclosed, oil bath transaxle allows for superior pulling ability
- Cast-aluminum design is the most robust in the industry
- Helical forward and reverse gears are used for quiet operation
- Rear traction assist (differential lock) is built in and can be engaged on demand
- Allows locking the rear drive wheels together
- Provides increased traction in tough spots
- NOTE: Differential design reduces scuffing of the turf during turns because it allows the inside wheels to turn slower than the outside wheels
- Neutral start safety interlock for engine ignition system
- Large, sealed bearings are located inside the housing for better protection and durability
- Contains gear case for transferring power to the MFWD
- Splined shaft interfaces for maximum torque transfer and durability
- All drive gears machined from highest grade gear steel
- Protected by a skid plate
- Electronic design is auto-locking for ease of use
- Performs like a locking differential when engaged, but like an open differential when cornering
- Offers positive engagement of both front wheels in forward and reverse as a differential package
- Automatic engagement on the fly—no shift linkages required
- Protected by a skid plate and frame
- Drive shafts
- Rear CV shaft diameter measures 27 mm (1.1 in.) and is designed for peak engine and braking torque
- Front CV shaft diameter measures 23.9 mm (0.94 in.) and is designed for peak engine torque
- Propshaft (transaxle to MFWD shaft) diameter measures 23 mm (0.91 in.) and is designed for peak engine torque
- All CV shaft and propshaft joints are maintenance free and protected by exclusive Neoprene boots for durability
Extra-durable deluxe cargo box ensures hard-working performance and longevity
The deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust, dents, and reduces noise.
Deluxe cargo box tailgate
The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate has been improved, features truck-like performance, and can be operated with one hand.
The standard-installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.
Deluxe cargo box tilt
The deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist.
A prop rod is provided to hold the box in the upright position for operator convenience, as well as to limit box pivot travel.
Integrated tie-down points
The deluxe cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:
- Four corners inside the cargo box bed
- Four points on the load guard directly behind the operator station (A)
- Tie-down bars on either side of the cargo box (B)
- Six points on the underside of the cargo box frame (circled)
Converting deluxe cargo box to a flat bed
The deluxe cargo box easily converts to a flat bed. The flatbed configuration allows loading larger cargo.
Optional accessories for the deluxe cargo box include:
- Factory-installed brake and taillight
- Factory-installed spray-in liner (not shown)
- Improves skid resistance and surface abrasion protection
- Cargo box bed mat
- Cargo box power lift
|| 1143 mm (45 in.)
|| 1320 mm (52 in.)
|| 304 mm (11 in.)
|| 0.46 m3 (16.4 cu ft)
| Weight capacity
|| 454 kg (1000 lb)
| Dump angle
|| 47 degrees
CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.
Accessories and Attachments
+ Label kit for toolboxes (Green & Yellow) - BM26220
+ Utility Cart, 21 Steel - LPUT21JD
+ Front Hood Rack - BM22980
+ MOLLE Device Pouch - Black - LP66151
+ MOLLE Device Pouch - Camo - LP66150
+ MOLLE Fire Extinguisher Pouch - Black - LP66153
+ MOLLE Fire Extinguisher Pouch - Camo - LP66152
+ MOLLE Large Pouch - Black - LP66149
+ MOLLE Large Pouch - Camo - LP66148
+ MOLLE Small Pouch - Black - LP66147
+ MOLLE Small Pouch - Camo - LP66146
+ Tow-Behind High Performance Sprayer, 45 gal. (170 L), requires LP22884 or LP22885 boom - LP39963
+ Tow-Behind Sprayer, 45 gal. (170 L) - LP20485
+ 170.344 L (45 gal) Bed Sprayer - LP20852
+ 170.344 L (45 gal) High Performance Sprayer - LP22908
+ 25 Gallon Bed Sprayer - LP33597
+ 25 Gallon Portable Sprayer - LP19490
+ 90 Gallon Bed Sprayer - LP20853
+ 90 Gallon High Performance Single Tank Sprayer - LP48006
+ GatorPal High Pressure Washer (2700 psi, Honda engine) - LPGP2700GH
+ GatorPal High Pressure Washer (2700 psi, Subaru engine) - LPGP2700GS
+ GatorPal High Pressure Washer (3000 psi, Honda engine) - LPGP3000GH
+ GatorPal High Pressure Washer (3000 psi, Subaru engine) - LPGP3000GS
+ HP Standard Gator Boom - LP22911
+ High Performance Sprayer Precision Boom (12.5 ft) - LP22885
+ High performance boomless nozzles - LP22884
+ 17AT Cart - LPPCT17ATJD
+ 3 cu. ft. Fertilizer Spreader - LP49056
+ 3 cu. ft. Salt Spreader - LP49055
+ 5 cu. ft. Drop Spreader - LP53512
+ Spreader hitch and controls - LP49057
+ Gator Gear Organizer (Camo) - LP19877
+ Gator Toolbox - LP19886
+ Label kit for toolboxes (Camo) - BM26219
+ Label kit for toolboxes (Olive & Black) - BM26218
+ MOLLE OPS Storage Panel- Camo - LP66154
+ OPS Overhead Organizer - Black - LP93117
+ Side Opening Toolbox - BM26160
+ Soft Rear Screen and Organizer - Black - LP93207
+Top Opening Toolbox - BM26162
+ Camoplast Tracks (Diesel) - LP40897
+ WARN ProVantage 2041-kg (4500-lb) Winch - BM25170
+ WARN ProVantage 3500 lb Winch - BM26741
+ Winch Accessories Kit - BM21392
+ Winch Kit 4500lb, Winch - BUC10682
+ Wireless Winch Remote - BM26662
Winch Mounting Kit
+ Winch Bumper Mount Kit 1587-kg (3500-lb) - BM24466
+ Winch Bumper Mount Kit 1587-kg (3500-lb) - BM26742
+ Winch Bumper Mount Kit 2041-kg (4500-lb) - BM24642
+ Winch Kit, Bumper Mount 4500 lb - BUC10693
+ Winch Receiver Mount Kit 1587-kg (3500-lb) - BM26747
+ Winch bumper mount kit (4500 lb) - BM26744
+ Winch kit, Bumper Mount 3500 lb - BUC10691