AKRS Equipment Solutions™

AKRS Equipment Solutions™

Search Used Inventory    Search Products & Site

Double tap to zoom



  • PowerTech™ PSS cooled exhaust gas recirculation (EGR)
  • Standard CommandView™ III cab offers unsurpassed amenities
  • e18™ PowerShift™ transmission with Efficiency Manager™ feature
  • JDLink™ services and Service ADVISOR™ diagnostic systems
  • High flow hydraulics, 115 gpm (435-L/min) system
  • General maintenance
  • Tow cable attachment


Model John Deere 9520RX Scraper Special
Engine description John Deere PowerTech™ PSS 13.5L (B20 diesel compatible)
Engine displacement 13.5 L
824 cu in.
Rated engine power 382 kW
520 hp
Transmission type tandard: John Deere e18™ 18-speed PowerShift with Efficiency Manager™: 40 km/h  25 mph
Hydraulic pump rated output Standard: 220 L/min
58 gpm
Optional: 435 L/min
115 gpm
Rear hitch category (SAE designation)  
Base machine weight 24,494 kg
54,000 lb
Description John Deere PowerTech™ PSS 13.5L (B20 diesel compatible)
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Engine family JJDXL13.5310
Rated speed 2100 rpm
Aspiration Dual series turbocharger with fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
After treatment type DOC/DPF/SCR
Displacement 13.5 L
824 cu in.
Rated power 382 kW
520 hp
Rated PTO power (hp SAE)  
Power boost 10 percent
Engine peak torque At 1600 rpm: 2,400 Nm  380 lb-ft
PTO torque rise 38 percent
Type Standard: John Deere e18™ 18-speed PowerShift with Efficiency Manager™: 40 km/h  25 mph
Type Closed-center, pressure/flow compensated
Pump rated output Standard: 220 L/min
58 gpm
Optional: 435 L/min
115 gpm
Available flow at a single rear SCV 0.5 in. couplers: 132 L/min
35 gpm
3/4 in. couplers: 159 L/min
42 gpm
Available flow at front SCVs  
Number of rear selective control valves (SCVs) Standard: ISO Couplers: 4
Optional: ISO Couplers: 6
SCV control Electronic
Drawbar category Drawbar Support for Short Scraper Drawbars
Final drive type Bull gear and double idler with floating pinion
Rear differential lock Full-locking electrohydraulic
Front axle differential lock Full-locking electrohydraulic
Front Tracks: 762 mm30 in.
Rear Tracks: 762 mm30 in.
Wheel tread range 2,235 mm  88 in.
Turning radius without brakes 9.1 m  30 ft
Type Standard: Hydraulic power-steering
Optional: ActiveCommand™ Steering (ACS)
Alternator size Standard: 200 amp
Optional: 240 amp
Battery options 12 V
Total cold cranking amps 925 CCA
Seat ComfortCommand™
Cab suspension Standard
Instructional seat Standard
Display Standard: 4100 Generation 4 CommandCenter™ with 7 in. display
Optional: 4600 Generation 4 CommandCenter™ with 10 in. display
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume 3.597 m3
127 cu ft
Cab glass area 6.52 m2
70.18 sq ft
Wheelbase 4,154 mm  163.5 in.
Overall length Excluding hitch: 7,637 mm   300.7 in.
Approximate shipping weight, Open;Cab 24,494 kg
54,000 lb
Base machine weight 24,494 kg
54,000 lb
Maximum ballast level 28,122 kg
62,000 lb
Crankcase oil volume 48 L
12.7 U.S. gal.
Fuel tank 1,514 L
400 U.S. gal.
Diesel exhaust fluid (DEF) tank 83 L
22 U.S. gal.
Cooling system 56.5 L
14.9 U.S. gal.
Transmission-hydraulic system With 3-point hitch and PTO: 223 L
59 U.S. gal.
Interval for engine oil change 400 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours
Guidance AutoTrac™ Ready
Telematic Available with JDLink™ hardware, activations, and Ethernet Harnesses (availability dependent upon destination)
Remote diagnostics Available with activated JDLink hardware and activations
Country of manufacture USA
Date collected 24-May-17

AKRS Equipment Solutions