Search Used Inventory    Search Products & Site

Double tap to zoom

 

Features

Hagie™ STS16 engine

9.0-L (549-cu in.) Final Tier 4 (FT4) John Deere engine

The Hagie STS16 Sprayer is powered by the PowerTech PSS 9.0-L (549-cu in.) John Deere diesel engine, which is offered in a 279.6-kW (375-hp) FT4 configuration.

These turbocharged, air-to-air aspirated engines deliver consistent power over a wide range of engine speeds (rpm) with a power bulge rated speed to provide excellent torque in demanding applications.

Engine location

The rear-mounted engine keeps constant weight to offset the spray boom and leaves space in the center of machine for the varying weight of fuel and rinse tanks. This allows for better coolant airflow and reduction of cab noise.

Solution tank, pump, and pump switch

The solution system is a constantly monitored, continuously adjusted, computer-controlled system. The cab-mounted digital spray system console receives information from various inputs to help determine L/ha (gpa) and L/min (gpm).

Solution tank
Sprayer model Tank capacity Tank type
STS10 3785 L (1000 gal.) Stainless-steel tank
STS12 4542 L (1200 gal.) Stainless-steel tank
STS14 5299 L (1400 gal.) Stainless-steel tank
STS16 6056 L (1600 gal.) Stainless-steel tank
Solution pump

The Hypro® 9306C-HM1C-BU solution pump (located beneath center of machine) is a centrifugal-type, hydraulically-driven pump that is controlled by the solution pump control valve and the spray system console. It comes with silicon-carbide seals, 7.6-cm (3-in.) inlet plumbing and 5.1-cm (2-in.) outlet plumbing.

The solution pump draws solution out of the tank at the rate determined during calibration. It dispenses solution through the many valves and hoses that make up the spray system and also dispenses fluids through the agitation and rinse systems.

Solution pump switch

The solution pump switch is located on the side console and is used to turn the solution pump on and off.

NOTE: When the solution pump is on, a solution pump indicator (located on the machine display home page - field mode) will be illuminated.

 

Hypro is a trademark of Pentair Flow Technologies, LLC.

STS Series spray booms

The spray booms are controlled by an electrohydraulic system. This system consists of operator-manipulated switches (located on the side console and the hydrostatic drive control handle) and hydraulic cylinders (attached to the booms), which provide lift, level, and horizontal extension.

The spray booms are offered in a variety of configurations depending on the model and the producer's application needs.

 

Materials used in boom construction:

  • 27.4-m/30.5-m (90-ft/100-ft) booms - steel
  • 36.6-m (120-ft) booms - steel/aluminum hybrid

 

Frame and axles

The STS Series mainframe design features horizontal cross-through axle tubes, as well as boom and platform mounts on weldment.

  • 144.8-cm (57-in.) mainframe width (from outside of each mainframe tube)
  • 301-cm (118.5-in.) mainframe width (from outside of each boom cradle weldment)
  • 183-cm (72-in.) ground clearance

Specifications

Key Specs

Engine Peak rated power
279 kW
375 hp
Solution system - Capacity 6056 L
1600 gal.
Rinse tank capacity 378.5 L
100 gal.
Boom length options/Material 18/24/27, 18/30, or 27/37 m
60/80/90, 60/100, or 90/120 ft
Spray speed range 0.8 to 32 km/h
0.5 to 20 mph
Transport speed, maximum 56 km/h
35 mph
Suspension Independent air-ride
Crop clearance with standard tires 183 cm
72 in.
Total weight with widest boom 13,221 kg
29,149 lb

Engine

Make John Deere
Peak rated power 279 kW
375 hp
Emissions Final Tier 4 (FT4)
Number of cylinders Six
Displacement 9 L
548 cu in.
Alternator 240 amp
Fuel tank capacity 662 L
175 gal.
Diesel exhaust fluid (DEF) tank capacity 30.3 L
8 gal.

Solution system

Capacity 6056 L
1600 gal.
Tank material Stainless steel
Rinse tank capacity 378.5 L
100 gal.
Quick fill size 7.6 cm
3 in.
Automatic section control Optional
Solution system control John Deere
Fill location Front standard
Side/rear optional
Chemical injection method Raven Sidekick - optional
Chemical eductor Optional
Chemical eductor capacity (size) 30 L
8 gal.
Flow meter size 5.8 cm
2 in.
Pressure strainer 50 mesh
Boom strainer Standard 80 mesh

Boom

Boom length options 18/24/27, 18/30, or 27/37 m
60/80/90, 60/100, or 90/120 ft
Plumbing material Stainless steel
Ground height adjustment For 18/24/27-m and 18/30-m (60/80/90-ft and 60/100-ft) booms - 56 to 272 cm
22 to 107 in.
For 27/37-m (90/120-ft) booms - 43.2 to 297.2 cm
17 to 117 in.
Breakaway width For 27-m (90-ft) booms - 3 m
10 ft
For 30-m (100-ft) booms - 3.8 m
12.5 ft
For 36-m (120-ft) booms - 4.6 m
15 ft
Boom sections 7 or 9 sections on booms - 27/36 m
90/120 ft

Drivetrain

Type Cross-coupled dual hydrostatic
Drive Full-time four-wheel drive (4WD)
Shifting Infinitely variable
Hydraulic reservoir capacity 190 L
50 gal.
Spray speed range 0.8 to 32 km/h
0.5 to 20 mph
Transport speed, maximum 56 km/h
35 mph

Chassis

Dry compatible No
Suspension Independent air-ride
Crop clearance with standard tires 183 cm
72 in.
Front tires 380/85 R46, 320/90 R46, 320/105 R54, or 380/90 R54
Rear tires 380/85 R46, 320/90 R46, 320/105 R54, or 380/90 R54
Flotation tires LSW 680/55R42
Hydraulic tread adjust Optional
Wheel tread spacing 305 to 386 cm
120 to 152 in.
Wheel base 422 cm
166 in.
Turning radius 7 m
23 ft
Parking brake Integrated in final drives
Primary brakes Drive system dynamic braking
Ladder raise/lower Hydraulic
Total weight with 90-ft boom 13,339 kg
29,409 lb
Total weight with 120-ft boom 13,221 kg
29,149 lb

Options

Air compressor Onboard air
Foam marker capacity 12 L
3 gal.