Search Used Inventory    Search Products & Site

Double tap to zoom

 

Features

Hagie™ DTS Series engines

6.7-L (408.9-cu in.) Cummins® QSB engine

The Hagie DTS10 is powered by a 6.7-L (408.9-cu in.) Cummins QSB diesel engine providing 165-kW (225-hp) using an emissions-compliant Final Tier 4 (FT4) configuration. This 6.7-L (408.9-cu in.) engine is electronic with an air-to-air cooler and turbocharger.

 

The FT4 engine requires ultra-low sulfur diesel (ULSD).

Engine location

The rear-mounted engine keeps constant weight to offset the spray boom and leaves space in the center of machine for the varying weight of fuel and rinse tanks. This allows for better coolant airflow and reduction of cab noise.

Engine exhaust

The engine exhaust is located at the rear of the machine. This helps to reduce interior cab and noise vibration.

 

Cummins is a trademark of Cummins, Inc. Hagie is a trademark of Hagie Manufacturing Company, LLC and similar to John Deere branded equipment, Deere will also support Hagie equipment.

Solution tank, pump, and pump switch

Solution tank

Two 1892-L (500-gal.) polyethylene tanks are mounted on tank cradles on each side of the machine. The solution tank design allows the sump to drain on a 30 percent grade and is equipped with a spinball rinse system. A mechanical sight gauge is located on top of each solution tank to visually check the solution level at all times.

Solution pump

The Hypro® 9306C-HM1C solution pump (located beneath the center of the machine) is a centrifugal-type hydraulically driven pump that is controlled by the solution pump control valve and the spray system console. It comes with silicon-carbide seals.

The solution pump draws solution out of the tank at the rate determined during calibration. It dispenses solution through the many valves and hoses that make up the spray system and also dispenses fluids through the agitation and rinse systems.

Solution pump switch

The solution pump switch is located on the side console and is used to turn the solution pump on and off.

NOTE: When the solution pump is on, a solution pump indicator (located on the machine display home page - field mode) will illuminate.

 

Hypro is a trademark of Pentair Flow Technologies, LLC.

DTS10 spray booms

The spray booms are controlled by an electrohydraulic system. This system consists of operator-manipulated switches (located on the side console and the hydrostatic drive control handle) and hydraulic cylinders (attached to the booms), which provide lift, level, and horizontal extension.

Hydraulically folding the extensions of an 18.3- or 24.4-m (60- or 80-ft) or 18.3- or 27.4-m (60- or 90-ft) spray boom and shutting off the outer sections essentially turns it into an 18.3-m (60-ft) spray boom. The wet boom connections feature with ARAG® EasyFit fittings with an o-ring seal and are 13-mm (0.5-in.) schedule 5 pipe-fed from one end with a 25-mm (1-in.) hose.

 

ARAG is a trademark of ARAG S.r.l.

Frame and axles

The DTS10 Sprayer mainframe design features horizontal cross-through axle tubes, as well as boom and platform mounts on weldment.

  • 360.7-cm (142-in.) mainframe width
  • 182.9-cm (72-in.) ground clearance

Specifications

Key Specs

Engine Peak rated power
167 kW
225 hp
Solution system - Capacity Two tanks - per tank - 1890 L
500 gal.
Rinse tank capacity 208 L
55 gal.
Boom length options/Material 18/24 and 18/27 m
60/80 and 60/90 ft
Spray speed range 0.8 to 32 km/h
0.5 to 20 mph
Transport speed, maximum 48 km/h
30 mph
Suspension Independent air-ride
Crop clearance with standard tires 182 cm
72 in.

Engine

Peak rated power 167 kW
225 hp
Emissions Final Tier 4 (FT4)
Number of cylinders Six
Displacement 6.7 L
409 cu in.
Alternator 200 amp
Fuel tank capacity 378.5 L
100 gal.
Diesel exhaust fluid (DEF) tank capacity 37.9 L
10 gal.

Solution system

Capacity Per tank - 1890 L
500 gal.
Tank material Poly
Rinse tank capacity 208 L
55 gal.
Quick fill size Quick-fill connection - 5.1 cm
2 in.
Rate control make John Deere
Raven / Ag Leader optional
Automatic section control Optional
Solution system control John Deere
Raven/Ag Leader - optional
Fill location Rear
Chemical eductor Optional
Chemical eductor capacity (size) 30.3 L
8 gal.
Flow meter size 5.8 cm
2 in.
Pressure strainer 50 mesh
Boom strainer Optional 80 mesh

Boom

Boom length options 18/24 and 18/27 m
60/80 and 60/90 ft
Automatic boom height NORAC
Plumbing material Stainless steel
Ground height adjustment 58 to 257 cm
23 to 101 in.
Breakaway width For 27-m (90-ft) booms - 3 m
10 ft
Boom sections Seven sections for boom widths - 18/24 and 18/27 m
60/80 and 60/90 ft

Drivetrain

Type Hydrostatic
Drive Full-time four-wheel drive (4WD)
Shifting Dual range speed control with incremental speed adjustment within each range
Hydraulic reservoir capacity 95 L
25 gal.
Spray speed range 0.8 to 32 km/h
0.5 to 20 mph
Transport speed, maximum 48 km/h
30 mph

Chassis

Dry compatible No
Suspension Independent air-ride
Crop clearance with standard tires 182 cm
72 in.
Front tires 380/80R38 or 320/80R42
Rear tires 380/80R38 or 320/80R42
Flotation tires 540/65R30
Hydraulic tread adjust Optional
Wheel tread spacing 305 to 406 cm
120 to 160 in.
Wheel base 353 cm
139 in.
Turning radius 5.9 m
19.4 ft
Parking brake Integrated in final drives
Primary brakes Drive system dynamic braking
Ladder raise/lower Hydraulic
Total weight with 80-ft boom 9,162 kg
20,200 lb
Total weight with 90-ft boom 9,307 kg
20,520 lb

Options

Air compressor Onboard air
Foam marker capacity 11.35 L
3 gal.