AKRS Equipment Solutions™

AKRS Equipment Solutions™

Search Used Inventory    Search Products & Site

Double tap to zoom

 

Features

  • Windrowing capability with 700D Drapers
  • Double-cut knife system produces a cleaner cut
  • Dual-knife drive system is timed
  • Cutterbar is closer to the ground

Specifications

Key Specs

Cutterbar length 7.8 m
25.5 ft
Knife drive Base: single (combine use only)
Optional: dual knife (combine use only)
Base: dual knife (SPW only or SPW/combine combination use)
Knife speed 490 cycles/min
Pickup reel operating speeds 6-54 rpm
54-in. reel: 5-44 rpm
Draper belts speed control Hydraulic from cab

Platform

Type Rigid draper

Cutterbar

Type Straight-line knife drive system
Length 7.8 m
25.5 ft
Knife drive Base: single (combine use only)
Optional: dual knife (combine use only)
Base: dual knife (SPW only or SPW/combine combination use)
Knife speed 490 cycles/min
Cutterbar tilt Base: hydraulic, maximum tilt 9 degree (angle)

Pickup reel

Number of slats Six bat poly base
Eight bat steel optional (for forage conditions)
Fingers Base: nylon
Optional: steel (typically used in rice or forage conditions)
Diameter 1.067 m
3.5 ft
For rice or forage conditions: 1.371 m
4.5 ft
Height control Hydraulic
Speed control Hydraulic
Reel lift Cylinder stroke: 330 mm
13 in.
Total range: 391.5 mm
15.4 in.
Reel fore and aft Cylinder stroke: 359 mm
14.1 in.
Total range: 620 mm
24.4 in.
Reel resume Base
Reel reverse Base
Operating speeds 6-54 rpm
Operating speeds (54-in. reel) 5-44 rpm

Draper belts

Width 0.7 L
24 oz
rubber coated polyester with V-Guide tracking
Side belts: 1.02 m
3.33 ft
Center belts: 1.4 m
4.583 ft
Center belt not included with SPW configuration
Clean height 25.4 mm
1 in.
Operating speed Side belts: variable up to 223 m/min
735 fpm
Center belts: 212 m/min
695 fpm
Center belt not included with SPW configuration
Speed control Hydraulic from cab
Center belt reverse Base; Center belt not included with SPW configuration

Feed drum

Diameter 406 mm
16 in.
Feed drum not included with SPW configuration
Feed drum fingers Steel, heavy-duty, and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.
Number of fingers 18
Auger finger platform Dual chevron, retracting
Finger reach 152 mm
6 in.
Drum/auger reverse Base
Operating speed 195 rpm
Center clean out door Base

Header height sensing

Type Base: electrohydraulic
Header height sensing on the ground Base
Header height sensing off the ground  

Auxiliary top auger

Type Optional: hydraulic drive

Dimensions

Platform length 8.5 m
27.9 ft
Overall operating depth 2.4 m
7.9 ft
Transport width, field position 8.1 m
26.5 ft

Weight

Approximate weight Pickup reel - combine only: 2,884 kg
6,359 lb
Pickup reel - SPW only: 2,284 kg
5,036 lb
Optional 137.2-cm (54-in.) reel - combine only: 2,974 kg
6,556 lb
Optional 137.2-cm (54-in.) reel - SPW only: 2,374 kg
5,234 lb

AKRS Equipment Solutions