Search Used Inventory    Search Products & Site

Husqvarna HUSQVARNA 550 XP® Mark II

Double tap to zoom

 

Features

Excellent cooling capacity for a longer engine life
Our new cooling system is optimized in every detail to give you a reliable chainsaw for any situation.

Felling sight to last a lifetime
Perfect sight is critical when felling – so we made one that will outlast the chainsaw itself.

Retained bar nuts
The retaining function prevents loosing the bar nuts.

LowVib®
System designed to reduce vibration levels to the operator, which lessens fatigue.

Slimmed-down design

Low, slender saw body makes the chainsaw easy and convenient to handle in any situation.

Air Injection®

Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.

Flip up tank caps

Easy to open and secure firmly, even when wearing thick winter gloves.

Quick-release air filter

Facilitates cleaning and replacement of the air filter.

Magnesium crankcase

Sturdily built crankcase withstands high rpms and tough professional use, ensuring a long service life.

Retained starter screws

The retaining function prevents loosing the screws holding the starter.

Snap-lock cylinder cover

Saves time when changing spark plugs and cleaning.

AutoTune

AutoTune gives optimal engine performance throughout automatic engine setting. No time spent on carburetor adjustments. It compensates for different fuels, altitude, humidity, temperature and clogged air filter.

X-Torq®

Delivers lower fuel consumption and reduced exhaust emission levels in accordance with the world´s most stringent environmental regulations.

Visible fuel level

Transparent fuel indicator makes it easy to check fuel level.

Three-piece crankshaft

Forged three-piece crankshaft for maximum durability for the toughest applications.

Side-mounted chain tensioner

Easier access to chain tensioning device.

Adjustable oil pump

Allows you to control oil flow depending on application and weather conditions.

 

Specifications

Engine 
Cylinder displacement 50.1 см³
Cylinder displacement 3.06 cu.inch
Power output 4 hp
Maximum power speed 10200 rpm
Fuel tank volume 1.12 US pint
Fuel consumption 432 g/kWh
Idling speed 2800 rpm
Spark plug NGK CMR6H
Electrode gap 0.02 in
Torque Max 3.15 Nm
Equipment 
Recommended bar length, max 20 in
Recommended bar length, min 13 in
Dimensions 
Weight (excl. cutting equipment) 11.7 lbs
Lubricant 
Oil tank volume 0.68 US pint
Oil pump type Adjustable flow, no flow at idle
Sound and Noise 
Sound power level, guaranteed (LWA) 117 dB(A)
Sound power level, measured 115 dB(A)
Sound pressure level at operators ear 107 dB(A)
Vibration 
Equivalent vibration level (ahv, eq) front handle 3.3m/s²
Equivalent vibration level (ahv, eq) rear handle 4.9 m/s²